Share:
Product Description
- The machine adopts ISO international code. Keyboard manual data input, it is also provided with program of power cut off protection and the functions of automatic disgnosis, and with RS232 interface.
- Longitudinal and cross feeds are effected by ball leadscrews.
- Either vertical and horizontal 4-station or 6 -station tool post or gang tools can be selected. The post is located on precision contrite gear with a high repeated positioning accuracy.
- Both chuck and tailstock are supplied with hydraulic or manual type.
- The surface of the bedways is supersonic frequency hardened and precision ground with a long service life.
- Variable spndle speed can be programmed as two rangs, that is high one and low one.
| Items | CK6150B | |
| Max. swing over bed | ø500mm | |
| Max. swing over carriage | ø310mm | |
| Width of bed | 405mm | |
| Max. work-piece length | 750/100/1500/2000/3000mm | |
| Max. turning length | 650/900/1400/1900/2900mm | |
| Max. swing in gap | ||
| Length of gap | 230mm | |
| Spindle bore | ø80mm | |
| Cone hole diameter and taper of spindle hole | MT.NO.7 | |
| Steps of spindle speed(manual) | Variable | |
| Rang of spindle speed | 400-1600 rpm (high) | |
| 50-400 rpm (low) | ||
| Rapid feed for axis Z | 10m/min | |
| Rapid feed for axis X | 8m/min | |
| Max .travel of axis Z | 720/970/1270/1970/2970mm | |
| Max, travel of axis X | 300mm | |
| Min. input | 0.001mm | |
| Tool post stations | 4-ways or 6-ways | |
| Tool cross section | 32*32mm | |
| External diameter | ø75mm | |
| Taper of bore | MT.NO.5 | |
| Max. traverse | 150mm | |
| X/Z motor torque | 7.5/10Nm(750~2000) 7.5/22Nm(3000) | |
| Power of main motor | 7.5KW | |
| Power of cooling pump | 90W | |
| Net weight | 2700/3000/3500/4000/4600kg | |